Products of other enterprises
Technical characteristics
- BrandYONJOU
- Plant manufacturerZhejiang YonJou Technology Co.,Ltd
- Tooth profileBevel Gear
Description
Horizontal Horizontal Hydraulic Gear Pump
Advantage:
1. High viscosity liquid transfer
2. Good hyaulic system usage performance
3. Lubricating liquid transfer pump
4. Simple structure, stable quality and afte-sale service
5. ISO9001:2008,CE, QA control
Dear Friends,
Welcome to YONJOU PUMP and thank you very much for your time sharing with us.
Summarize
CB-B Gear oil pump use two gyres gear to transfer engine power which produced by motor into hydraulic perssure power, and this power is used in hydraulic pressure system of machine tool and other machine.
When it equip motor, call S type gear oil pump.
S type oil transfer pump can pump oil from one tank to another tank with clear oil viscosity from 1-8°E. It has enough effeciency to save main power in all industries and household.
Usage:
1. Lubricating oil: Crude oil, diesel oil, lubricants, oil-type liquid.non corrosive, temperature from 10-50ºC.
2. To avoid the solids sucked to the pump, pump should install more than 50mm higher than the botton of oil tank pumped, but not higher than 1 meter. The oil inlet pipe should not over 4m. If pump can not work, check if the pump work in the correct direction, if there's any clog, or leak with the pump and pipes.
3. There are single phase motor or three phase motors for clients' choice.
4.Initial voltage detected of the pump's cable connection case should reach 180V to start the pump
5. Volatile liquids such as gasline can not be pumped.
Advantage:
1. High viscosity liquid transfer
2. Good hyaulic system usage performance
3. Lubricating liquid transfer pump
4. Simple structure, stable quality and afte-sale service
5. ISO9001:2008,CE, QA control
Dear Friends,
Welcome to YONJOU PUMP and thank you very much for your time sharing with us.
Summarize
CB-B Gear oil pump use two gyres gear to transfer engine power which produced by motor into hydraulic perssure power, and this power is used in hydraulic pressure system of machine tool and other machine.
When it equip motor, call S type gear oil pump.
S type oil transfer pump can pump oil from one tank to another tank with clear oil viscosity from 1-8°E. It has enough effeciency to save main power in all industries and household.
Usage:
1. Lubricating oil: Crude oil, diesel oil, lubricants, oil-type liquid.non corrosive, temperature from 10-50ºC.
2. To avoid the solids sucked to the pump, pump should install more than 50mm higher than the botton of oil tank pumped, but not higher than 1 meter. The oil inlet pipe should not over 4m. If pump can not work, check if the pump work in the correct direction, if there's any clog, or leak with the pump and pipes.
3. There are single phase motor or three phase motors for clients' choice.
4.Initial voltage detected of the pump's cable connection case should reach 180V to start the pump
5. Volatile liquids such as gasline can not be pumped.
Model | Capacity (L/min) | Pressure (Mpa) | Speed (rpm) | Power (kw) | Weight (kg) | Diameter |
CB-B2.5 | 2.5 | 2.5 | 1450 | 0.13 | 1.9 | 3/8" |
CB-B4 | 4 | 2.5 | 1450 | 0.21 | 2.8 | 3/8" |
CB-B6 | 6 | 2.5 | 1450 | 0.31 | 3.2 | 3/8" |
CB-B10 | 10 | 2.5 | 1450 | 0.51 | 3.5 | 3/8" |
CB-B16 | 16 | 2.5 | 1450 | 0.82 | 5.2 | 3/4" |
CB-B20 | 20 | 2.5 | 1450 | 1.02 | 5.4 | 3/4" |
CB -B25 | 25 | 2.5 | 1450 | 1.30 | 5.5 | 3/4" |
CB-B32 | 32 | 2.5 | 1450 | 1.65 | 5.7 | 3/4" |
CB-B40 | 40 | 2.5 | 1450 | 2.10 | 10.5 | 1"/3/4" |
CB-B50 | 50 | 2.5 | 1450 | 2.60 | 11 | 1"/3/4" |
CB-B63 | 63 | 2.5 | 1450 | 3.30 | 11.8 | 1"/3/4" |
CB-B80 | 80 | 2.5 | 1450 | 4.1 | 17.6 | 11/4"/1" |
CB-B100 | 100 | 2.5 | 1450 | 5.1 | 18.7 | 11/4"/1" |
CB-B125 | 125 | 2.5 | 1450 | 6.5 | 19.5 | 11/4"/1" |
Contact the seller
Horizontal Hydraulic Gear Pump