Room thermostat

Introduction: The Roomstat is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat.The thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint. Application: For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings. Features: LED indicator is light when heating is on With manual switch and knob for easy operation On/off control output for heating device Setback function when connecting with a programmable timer Temperature limitation function for protecting the floor TECHNICAL DATA: Voltage: AC230V (AC110V / AC24V available) Power consumption: 5W Setting range: 4°C~45°C Limitation scale: 25°C~50°C Setback temperature: 5°C Switching differential: ±0.5K Ambient temperature: -5°C~50°C Protective housing: IP20 Housing material: self-extinguishing PC Floor sensor: rubber-thermoplastic NTC sensor, Dimensions (H/W/D) 80/80/50 mm cable length is 3m