Automatic Sleeve Wrapper makes distribution packs in LDPE / PVC shrink films that will help you to lower your packaging costs and increase sales. The wrapper automatically collates products in the desired matrix and wraps them in film (usually LDPE film). It uses two rolls of single-wound film rolls that are sealed together by the previous sealing cycle and that form a single film curtain. The collated products are pushed through the film curtain and clamped at the other end of the sealing bar before making one more seal around the bundled products with a constantly-heated sealing bar. A distribution pack of multiple products wrapped together in film with a bull's eye at two ends is formed after this bundle goes through the shrink tunnel.
Containers can be cylindrical, oval, square or other shapes. The product-handling system can be customized for your products with the choice of In-Feed Conveyors, Multi-Lane In-Feeds, Product Turning Devices, Top Hold-Down Systems, Product Gating/Stopping/Spacing Mechanisms, Pick And Place Systems, Through Jaw Guides, Profile Pushers and so on.
Features
Mild-Steel painted construction
600 mm x 400 mm jaw opening (W x H)
Quick-release sealing jaw assembly
Gravity film feed
Low film detector
Pneumatic pusher with one set of pusher plate
1250 mm long infeed conveyor projecting outside the machine
Width of conveyor 150 mm
Technical Requirements (Bundler)
Power: 220 Volts AC 50/60 Hz
Maximum installed power: 1.8 kw
Air requirement: 6 bars @ 200 litres/min
Maximum film width (mm): 640
Maximum film reel diameter (mm): 300
Film thickness (microns): 30-100
Maximum Pack Size (mm): 600 W x 400 H
Speed (ppm): 5 to 10, depending on several factors
Technical Requirements (Shrink tunnel)
Power: 380V 50HZ 1PH/3PH
Maximum installed power: 24kw
Maximum Pack Size (mm):600(W) * 400(H)mm
Overall:3000*840*1600mm