Professional Photo studio flash light 180W 5600K
- Courier
- In detail
Technical data
Model | WDF-FL180 |
Flash output | 180WS |
Guide number(ISO100) | 40 |
Power control | 1/8~Full |
Recharge time | 1~3s |
Modeling lamp | 75W |
Color temperature | 5600K |
Trigger method | Sync cord ,slave sensor ,test button |
To achieve optimum performance ,please read this instruction before using this studio flash.
Precautions
(1) Be sure to connect it to a rated power source.
(2) Do not keep it in a hot or humid place .protect it from direct sunlight or being splashed.
(3) Do not handle this studio flash and power cord with wet hands.
(4) Never attempt to disassemble this studio flash owing to high voltage inside .Repair
should be done by authorized technicians.
SWITCHING OFF THE FLASH PROCEDURE
To switch off the Flash:
n Switch off at each Flash head
n Fire off each Flash head with the test button to drain any remaining current left in each unit (capacitor).it this procedure is not done ,it may cause the fuse to blow.
DO NOT USE CONE DIFFUSER
The Flash head is not suitable to be used with Cone Diffuser as it may over heat ,This will cause damage to the head unit.
DUTY CYCLE (Continuous use)
The Flash can be used at Full Power for 5 Minutes continuous .Then it should be cooled down for few minutes. Overheating will occur if used continuously without cooling down.