Borosilicate Foam Glass Lining Brick
- Courier
- In detail
- BrandDEHE
- Country of manufactureChina
Borosilicate Foam Glass Lining Brick
- Borosilicate foam glass, B203 containing, has good resistance to both acid and alkali, so it is a good protection layer to acid condensation produced from wet desulphurization.
- It works as a barrier to the alteration of high temperature and low temperature inside chimney, thus relief the chimney wall from thermal stress, and extend the service life of chimney.
- The compression strength of B203 containing foam glassbrick reaches more than 1.5MPa, which significantly exceeds the requirement of chimney liner, in a way offers potential to reduce the cost of the chimney.
- Its coefficient is less than 0.058 w/m.k, and its service life is the same as the chimney itself.
Physical Parameters
Item |
Performance Indicators |
Test Methods |
|
Type |
DH-180 |
DH-190 |
JC/T647-2005 |
Bulk Density:kg/m³ |
180±10 |
190±10 |
|
Thermal Conductivity:W(m.k)25℃ |
≦0.056 |
≦0.058 |
|
Compressive Strength:Mpa |
≧1.5 |
≧2.0 |
|
Compressive Strength:Mpa |
≧1.2 |
≧1.7 |
|
Water Absorption:% |
≦0.2 |
≦0.2 |
|
Combustion Performance |
Class A |
||
Acid Resistance(40% Sulfuric Acid Soaking for 30 Days at Room Temperature) |
≧0.95% |
||
Heat Resistance |
≧0.95% |
Comparison of the Flue Gas before and after Desulfurization
Before Desulfurization |
After Desulfurization |
Hot and Dry Acidic Flue Gas |
Low Temperature High Acidic Gas and Condesate |
Operating temperature is generally between 130℃--150℃ |
General operating temperature is between 40℃ to 50 ℃(Not det GGH flue gas heating system) |
Moisture content is low, flue gas condensation, strong corrosive |
High water content, the whole fule gas condesation, very corrosive |