- BrandExcellent
- Country of manufactureChina
1ml Auto Sampler shell Vial
HM-8240 1mL shell vial,1st hydrol glass,clear 8mm pe-plug,soft,without insertion 8.2×40mm
$0.275/piece
Crimp neck vials and closures N 8
Micro-vials with 8mm crimp neck
- 0.2-1.2ml usable volume
- Adapter required for use in an autosampler
- Available with flat,round or conical bottom,made of clear and amber glass
Aluminium crimp closures N 8
- Economic versions:three-layer septum Nature rubber/Butyl/TEF or two-layer septum Red Rubber/FEP
- For more demanding analyses:high purity Silicone /PTFE septa
Screw neck vials and closures N 8
- Are among the oldest vials for HPLC and GC (besides crimp neck vials N 11)
- More and more replaced by screw neck vials N 9,which are easier to fill due to the wide opening compared to screw neck neck vials N 8 with small opening
- Due to the cap design not universally usable on all autosamplers in GC and HPLC-however,often used on instruments of VWR(Merck)/Hitach ,Varian,Knauer,Gilson,Shimadzu and others
In combination with closed top screw closures also used for sample storage
Screw neck vials and closures N 9
- Can be used on almost all HPLC and GC autosamplers
- Lare range of vials and closures
- Also available as boned closures (advantage:think(blunt)HPLC needles can not push the septum into the vial)
- Also avaiable as convenient vial kits with 100 vials and 100caps and as presealed vial-closure combinations
Screw neck vials and closures N 8
- Wide opening for easy filling
- Due to the cap height not universally suitable for all instruments
- Often used on Waters,Shimadzu,PerkinElmer and Jasco instruments
Crimp neck vials and closures N 8
- Broad variety of standard crimp neck vials (with small or wide opening),as well as crimp neck micro-vials for smaller sample volumers
- Economic closuers:Natural rubber /TEF(2 layers).Natural rubber / Butyl /TEF(3 layers)and Red Rubber /fep (2 layers)
- For more demanding analyses:analytically pure Silicone/PTFE septa with lower fragmentation
- Magnetic closure:REF 702879 for use on CTC GC PAL
Snap ring vials and closures N 11
- Quick,convenient sealing method which,however,should only e used in HPLC
- Can be used on all common HPLC autosamplers
- Alternatively crimp closures N 11 can be used (see preceding pages)
- 0.3ml PP snap ring vial for special applications,e.g.,in ion chromatography
- Most frequent closure:with cross-slit Silicone /PTFE septum,which supports easy penetration with the relatively thick,blunt HPLC needle
Screw neck vials and closures N 13
- Generally used for large volume samples in HPLC
- In combination with closed top screw closures suitable for sample storage
- Compatible insert requires metal spring for centrical alignment
- Range of ready assembled closures and plain caps with center hole or with closed top as well as separate septa(PTFE virginal,Red Rubber /FEP and Silicone/PTFE) are available
Screw neck vials for storage of liquid samples
- Usable volumes of 1.5 up to 24ml
- Available neck sizes N 8,N9,N 13,N 15,N 18 and N 20
- Corresponding closed top screw closers with defferent septa materials
Snap cap vials storage of powdery samples
- Available size N 18 and N 22
- Usable volumes from 5 up to 25ml
- Glass of 3rd hydrolytic class
Screw neck vials and magnetic screw closures N 18
- Headspace vials for convenient,safe and consistent handling
- High tightness and better reproducibility of the sealing precess (as compared to crimping)
- Thinner septum (1.5mm instead of 3mm septum thickness in crimp caps),thus safe penetration of the needle and less fragmentation (especially important for SPME applications)
- Improved run in autosamplers with magnets(CTC Combi PAL and equivalent instruments),since a flat surface for the magnet is ensured,thus avoiding that the filled vial can drop from the magnet
Crimp neck vials and closures N 20
- Large rang of Headspace crimp neck vials with different volumes and diameters
- Flat DIN crimp neck with stable bearing surface for the septum(especially suited for high vial pressures)as well as beveled HS crimp neck for instruments of certain manufactures (PerkinElmer)
- Assignment to respective instrument manufacturers in parentheses
- Different types of crimp closures depengding on instrument and application
Manual crimping tools
Advanced ergonomic version
Available for 11mm and 20mm crimp caps
- More lightweighted than completed steel crimpers
- Ergonomically designed handles
- Adjustments by a knob on the crimping head that is easily accssible and visible
- activated by bottom handle motion only which allows a steadier and safer hold of the tool during crimping
- Due to design and alignment of the crimping head better vertical clearance over the vial
Advanced ergonomic decappers allow safe removal of caps;no adjustment required
Satndard version
Available for 8,11,13,and 20mm crimp caps
- Adjustable crimping height via hexagon key,which allows to move the inner part of the crimping head up and down (not possible for manual crimpers N 8)
- Crimping pressure adjustable via screw in the handle
- Manual crimpers for N 13 and N 20 Flip Top /Flip Off caps (pharmaceutical closures)available
- Long life time and convenient handling
Manual decappers (standard version) allow safe removal of caps;no adjustment required
Screw neck vials and closures N 24
- Recommend for VOC and TOC analyses
- Closed top screw closures for sample storage
- Most frequently used:40ml clear glass
- Often called EPA vials,since they are defined in the regulations of the US Environmental Protection Agency
- Due to thier size mainly used mainly used as bonded closure for firm fit of the septum
- Recommended for enviromental analysis:screw closure with center hole and Silicone /PTFE septum